Skip to main content
  • 100V

114-6BJ54 - CPUs | CPUs STEP7 programmable

Order no.

114-6BJ54

TypeVIPA CPU 114R

General information

Note-
FeaturesWork memory [KB]: 32
Onboard 16x DI / 8x DO relay / 2x Counter
Interface [MP²I]: MPI
MMC card slot, up to 4 modules stackable (100V or 200V)
Programmable with WinPLC7(lite) and SIMATIC Manager
WinPLC7(lite) please order separate SW211K2OD

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)150 mA
Current consumption (rated value)1 A
Inrush current58 A
I²t0.38 A²s
Max. current drain at backplane bus0.8 µA
Max. current drain load supply-
Power loss7 W
Reverse polarity protection

Technical data digital inputs

Number of inputs16
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 24 V
Reverse polarity protection of rated load voltage
Current consumption from load voltage L+ (without load)-
Rated valueDC 24 V
Input voltage for signal "0"DC 0...5 V
Input voltage for signal "1"DC 15...28.8 V
Signal logic inputSinking input
Input current for signal "1"7 mA
Connection of Two-Wire-BEROs possible
Max. permissible BERO quiescent current1.5 mA
Input delay of "0" to "1"3 ms
Input delay of "1" to "0"3 ms
Input characteristic curveIEC 61131-2, type 1
Initial data size3 Byte

Technical data digital outputs

Number of outputs8
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 30 V/ AC 230 V
Reverse polarity protection of rated load voltage-
Current consumption from load voltage L+ (without load)-
Total current per group, horizontal configuration, 40°C8 A
Total current per group, horizontal configuration, 60°C8 A
Total current per group, vertical configuration8 A
Output voltage signal "1" at min. current-
Output voltage signal "1" at max. current-
Output current at signal "1", rated value5 A
Output delay of "0" to "1"10 ms
Output delay of "1" to "0"5 ms
Minimum load current-
Lamp load-
Switching frequency with resistive loadmax. 0.33 Hz
Switching frequency with inductive load-
Switching frequency on lamp load-
Internal limitation of inductive shut-off voltage-
Short-circuit protection of output-
Trigger level-
Output data size3 Byte

Technical data counters

Number of counters4
Counter width32 Bit
Maximum input frequency30 kHz
Maximum count frequency30 kHz
Mode incremental encoder
Mode pulse / direction
Mode pulse
Mode frequency counter-
Mode period measurement-
Gate input available
Latch input available-
Reset input available-
Counter output available-

Status information, alarms, diagnostics

Status displayyes
Interruptsyes
Process alarmyes
Diagnostic interruptyes
Diagnostic functionsno
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Group error displayred SF LED
Channel error displaynone

Isolation

Between channels of groups to8
Between channels and backplane bus
Insulation tested withDC 500 V

PWM data

PWM channels-
PWM time basis-
Period length-
Minimum pulse width-
Type of output-

Load and working memory

Load memory, integrated40 KB
Load memory, maximum40 KB
Work memory, integrated32 KB
Work memory, maximal32 KB
Memory divided in 50% program / 50% data-
Memory card slotMMC-Card with max. 512 MB

Hardware configuration

Racks, max.1
Modules per rack, max.4
Number of integrated DP master-
Number of DP master via CP4
Operable function modules4
Operable communication modules PtP4
Operable communication modules LAN-

Status information, alarms, diagnostics

Status displayyes
Interruptsyes
Process alarmyes
Diagnostic interruptyes
Diagnostic functionsno
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Group error displayred SF LED
Channel error displaynone

Command processing times

Bit instructions, min.0.25 µs
Word instruction, min.1.2 µs
Double integer arithmetic, min.2.6 µs
Floating-point arithmetic, min.50 µs

Timers/Counters and their retentive characteristics

Number of S7 counters256
S7 counter remanenceadjustable 0 up to 64
S7 counter remanence adjustableC0 .. C7
Number of S7 times256
S7 times remanenceadjustable 0 up to 128
S7 times remanence adjustablenot retentive

Data range and retentive characteristic

Number of flags8192 Bit
Bit memories retentive characteristic adjustableadjustable 0 up to 256
Bit memories retentive characteristic presetMB0 .. MB15
Number of data blocks2047
Max. data blocks size16 KB
Number range DBs1 ... 2047
Max. local data size per execution level1024 Byte
Max. local data size per block1024 Byte

Blocks

Number of OBs14
Maximum OB size16 KB
Total number DBs, FBs, FCs-
Number of FBs1024
Maximum FB size16 KB
Number range FBs0 ... 1023
Number of FCs1024
Maximum FC size16 KB
Number range FCs0 ... 1023
Maximum nesting depth per priority class8
Maximum nesting depth additional within an error OB1

Time

Real-time clock buffered
Clock buffered period (min.)30 d
Type of bufferingVanadium Rechargeable Lithium Battery
Load time for 50% buffering period20 h
Load time for 100% buffering period48 h
Accuracy (max. deviation per day)10 s
Number of operating hours counter8
Clock synchronization-
Synchronization via MPI-
Synchronization via Ethernet (NTP)-

Address areas (I/O)

Input I/O address area1024 Byte
Output I/O address area1024 Byte
Process image adjustable-
Input process image preset128 Byte
Output process image preset128 Byte
Input process image maximal128 Byte
Output process image maximal128 Byte
Digital inputs8192
Digital outputs8192
Digital inputs central144
Digital outputs central136
Integrated digital inputs16
Integrated digital outputs8
Analog inputs512
Analog outputs512
Analog inputs, central32
Analog outputs, central16
Integrated analog inputs-
Integrated analog outputs-

Communication functions

PG/OP channel
Global data communication
Number of GD circuits, max.4
Size of GD packets, max.22 Byte
S7 basic communication
S7 basic communication, user data per job76 Byte
S7 communication
S7 communication as server
S7 communication as client-
S7 communication, user data per job160 Byte
Number of connections, max.16

Functionality Sub-D interfaces

TypeMP²I
Type of interfaceRS485
ConnectorSub-D, 9-pin, female
Electrically isolated-
MPI
MP²I (MPI/RS232)
Point-to-point interface-
5V DC Power supplymax. 90mA, non-isolated
24V DC Power supplymax. 100mA, non-isolated

Functionality MPI

Number of connections, max.16
PG/OP channel
Routing-
Global data communication
S7 basic communication
S7 communication
S7 communication as server
S7 communication as client-
Transmission speed, min.19.2 kbit/s
Transmission speed, max.187.5 kbit/s

Housing

MaterialPPE / PA 6.6
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)152.4 mm x 76 mm x 48 mm
Net weight280 g
Weight including accessories-
Gross weight-

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certification-

Downloads

[Datasheet]
[Manual]