Skip to main content
  • 200V

253-1DP11 - Interface modules | Fieldbus slave modules without I/Os

Order no.


TypeIM 253DPO, PROFIBUS-DP slave

General information

FeaturesDC 24 V
12 Mbit/s
Configuration via GSD-file of VIPA
Up to 32 modules (16 analog)
244 Byte input and 244 Byte output data
LWL-Interface (POF, HCS)

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)70 mA
Current consumption (rated value)1 A
Inrush current65 A
I²t0.85 A²s
Max. current drain at backplane bus3.5 A
Max. current drain load supply-
Power loss2.5 W

Status information, alarms, diagnostics

Status displayyes
Interruptsyes, parameterizable
Process alarmyes, parameterizable
Diagnostic interruptyes, parameterizable
Diagnostic functionsyes, parameterizable
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Service Indicator-
Group error displayred SF LED
Channel error displaynone

Hardware configuration

Racks, max.1
Modules per rack, max.32
Number of digital modules, max.32
Number of analog modules, max.16


FieldbusPROFIBUS-DP to EN 50170
Type of interfaceFOC
Connector2-pin FOC POF/HCS
TopologyLine structure with two-wire FOC
Electrically isolated
Number of participants, max.125
Node addresses1 - 99
Transmission speed, min.9.6 kbit/s
Transmission speed, max.12 Mbit/s
Address range inputs, max.244 Byte
Address range outputs, max.244 Byte
Number of TxPDOs, max.-
Number of RxPDOs, max.-


MaterialPPE / PA 6.6
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)25.4 mm x 76 mm x 78 mm
Net weight110 g
Weight including accessories-
Gross weight-

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C


UL certificationyes
KC certification-