Skip to main content
  • SLIO

032-1BD70 - Signal modules analog | Analog output modules

Order no.

032-1BD70

TypeSM 032
Module ID0506 25E0

General information

Note-
Features4 outputs 12Bit
Voltage -10 V...+10 V

Current consumption/power loss

Current consumption from backplane bus60 mA
Power loss0.8 W

Technical data analog outputs

Number of outputs4
Cable length, shielded200 m
Rated load voltageDC 24 V
Reverse polarity protection of rated load voltage
Current consumption from load voltage L+ (without load)-
Voltage output short-circuit protection
Voltage outputs
Min. load resistance (voltage range)5 kΩ
Max. capacitive load (current range)1 µF
Max. inductive load (current range)10 mA
Output voltage ranges-10 V ... +10 V
0 V ... +10 V
Operational limit of voltage ranges+/-0.3%
Basic error limit voltage ranges+/-0.2%
Destruction limit against external applied voltagemax. 24V
Current outputs-
Max. in load resistance (current range)-
Max. inductive load (current range)-
Typ. open circuit voltage current output-
Output current ranges-
Operational limit of current ranges-
Basic error limit current ranges-
Destruction limit against external applied voltage-
Settling time for ohmic load1.5 ms
Settling time for capacitive load2 ms
Settling time for inductive load-
Resolution in bit12
Conversion time2 ms all channels
Substitute value can be appliedno
Output data size8 Byte

Status information, alarms, diagnostics

Status displayyes
Interruptsno
Process alarmno
Diagnostic interruptno
Diagnostic functionsyes
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Group error displayred LED
Channel error displayred LED per channel

Isolation

Between channels-
Between channels of groups to-
Between channels and backplane bus
Between channels and power supply
Max. potential difference between circuits-
Max. potential difference between inputs (Ucm)-
Max. potential difference between Mana and Mintern (Uiso)DC 75 V/ AC 50 V
Max. potential difference between inputs and Mana (Ucm)-
Max. potential difference between inputs and Mintern (Uiso)-
Max. potential difference between Mintern and outputs-
Insulation tested withDC 500 V

Datasizes

Input bytes0
Output bytes8
Parameter bytes10
Diagnostic bytes20

Housing

MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)12.9 mm x 109 mm x 76.5 mm
Net weight60 g
Weight including accessories-
Gross weight-

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certificationyes

Downloads

[Datasheet]
[Manual]

[STP]