Skip to main content
  • SLIO

SLIO: Function modules

Function modules (FM) are intelligent modules that perform technological tasks such as position determination, counting and positioning, and other complex functions in the automation independently. They are used when there are high demands on accuracy and dynamic in the starting of automation tasks.

Different functional modules, for example counter modules, SSI modules provide exactly the functions that are required for the respective tasks.

Each functional module consists of a terminal and an electronic module.

The terminal module (TM) contains the retainer for the electronic module (EM), the backplane connectors and contacts for the distribution of the load power supply electronics, the modular connection to DC 24 V load power supply and the staircase-shaped terminal block for the wiring.

Furthermore the terminal module processes a locking system for fixing to a profile rail. The SLIO system can also be constructed "block by block" outside the cabinet and later assembled as a complete system in the control cabinet.

The functionality of the signal module is defined via the electronic module that is connected by a secure sliding mechanism to the terminal module.

During service the defective electronic module can be replaced without detaching the wiring.

Characteristics

Supports fast counter systems up to 1 MHz

Counting direction invertible

Integrated digital outputs

For direct connection of incremental encoders

Electrically isolated to the backplane bus

Direct mapping and readability of the channel conditions via status LEDs

Safe and time-saving installation by the terminal assignment mounted on the module

When changing the module equipment identification (BMK) is retained on the TM

Individual single-channel lettering on insertion strip

24 month warranty


Order no.Name/Description

050-1BA00

FM 050 - Counter module

1x Counter 32 Bit (AB), DC 24 V
Up to 400 kHz
1x DO, DC 24 V
0,5 A
[Datasheet]
[Manual]
[STP]

050-1BA10

FM 050 - Counter module

1x Counter 32 Bit (AB), DC 5 V
Up to 2 MHz (difference signal)
[Datasheet]
[Manual]
[STP]

050-1BB00

FM 050 - Counter module

2x Counter 32 Bit (AB), DC 24 V
Up to 400 kHz
[Datasheet]
[Manual]
[STP]

050-1BB30

FM 050 - Counter module Eco

2x Counter 32 Bit (AB) DC 24 V
Up to 400 kHz
[Datasheet]
[Manual]
[STP]

050-1BB40

FM 050 - Frequency measurement

Frequency measurement
2x Counter 24 Bit (AB), DC 24 V
Up to 600 kHz
[Datasheet]
[Manual]
[STP]

050-1BS00

FM 050S - SSI module

SSI - Encoder, master or slave mode
Encoder frequency 125 kHz...2 MHz
μs time stamp for encoder value
Comparison function
Alarm function
Diagnostic function
[Datasheet]
[Manual]
[STP]

054-1BA00

FM054 – Stepper motor module

1-channel with feedback
4 inputs/outputs DC 24 V, which can be used as encoder inputs
Power control frequency 32 kHz
Step pattern 64 times microstepping
[Datasheet]
[Manual]

054-1CB00

FM054 - DC motor module

2-channel with feedback
4 inputs/outputs DC 24 V, which can be used as encoder inputs
PWM clock frequency 32 kHz
[Datasheet]
[Manual]

054-1DA00

FM054 - Pulse Train Output Module

1-channel RS422 with feedback
4 configurable in-/outputs I/O1... I/O4
Operating modes: CW/CCW, PLS/DIR, ENC/SIM
[Datasheet]
[Manual]