Skip to main content
  • 200V

200V: Communication processors

Communications processors are used to connect different target and source systems, e.g. via Ethernet to higher-level ERP systems or serially to scanners, printers and other peripherals.

CP 240 - serial

The communication processors CP 240 serial enable the serial process coupling to different target and source systems. Depending on the module they have a RS232 and/or a RS485 interface.

CP 240 - EnOcean

The CP 240 EnOcean enables process coupling on the basis of the EnOcean wireless communication. EnOcean is a battery-free radio system that, due to the short signal duration of 0.5 ms and 10 mW transmitting power, has an energy requirement of only 50 μWs. Here, the system uses the energy from the smallest changes in pressure or temperature to power the sensors.

CP 240 - M-Bus

In the case of the CP 240 M-Bus, the process coupling takes place on the basis of the M-Bus communication. The M-Bus System (Metering Bus) is a European-standardized 2-wire fieldbus for acquiring consumption data. Here, the data is transmitted serially via a reverse polarity protected 2-wire line from slave systems (meters) to a master system.

Characteristics

Support for all standard protocols (ASCII, STX/ETX, 3964(R), RK512 and Modbus (master, slave)

Internal communication via VIPA FCs

Compact design

LED status indicator

Electrically isolated to the backplane bus

Assembly with 35 mm profile rail

24 month warranty


Order no.Name/Description

208-1CA00

IM 208CAN - CANopen master␍

CANopen master
125 CAN slaves connectable
Project engineering under VIPA WinCoCT
40 Transmit PDOs, 40 Receive PDOs
[Datasheet]
[Manual]

208-1DP01

IM 208DP - PROFIBUS-DP master␍

PROFIBUS-DP master
125 DP slaves connectable
[Datasheet]
[Manual]

208-1DP11

IM 208DPO - PROFIBUS-DP master

PROFIBUS-DP master
16 DP slaves connectable
FO interface
[Datasheet]
[Manual]

240-1BA20

CP 240 - Communication processor␍

RS232 interface
[Datasheet]
[Manual]

240-1CA20

CP 240 - Communication processor␍

RS485 interface
[Datasheet]
[Manual]

240-1CA21

CP 240 - Communication processor␍

RS422/485 interface
[Datasheet]
[Manual]

240-1DA10

CM 240 - Mini-switch␍

4 Ports for 10/100 MBit/s
"plug and play" through Auto-MDI/MDIX-crossover for 100BASE-TX and 10BASE-T
LEDs for activity, speed and collision
[Datasheet]
[Manual]

240-1EA20

CP 240 - Communication processor␍

16 Byte parameter data
The transceiver module works at 868.3 MHz
[Datasheet]
[Manual]

240-1FA20

CP 240 - Communication processor␍

M-Bus master, potential separated
up to 6 slaves
[Datasheet]
[Manual]