Skip to main content
  • SLIO

SLIO: Clamp modules

Clamp modules are passive modules for 2- or 3-wire installations, whose contacts are vertical electrical connected internal. Within the module the backplane bus feed-through. The module does not have any module identification, but is considered at the maximum number of the modules.

Through the application of the clamp modules, distributors for power supply could be realized easily and enables so the connection of active supplied sensors like proximity switch. The wiring is done via timesaving and secure cage clamp technique.

The clamp modules are fixed on the mounting surface by means of a 35mm DIN rail.

Features

Maintenance-free cage clamp technique

Backplane bus feed-through

Max. terminal voltage 10A

Potential separation 500 Veff (field voltage to bus)

Mounting on a 35mm DIN rail

24 month guarantee


Order no.Name/Description

001-1BA00

CM 001 - Potential distributor module

8xDC 24 V clamps
[Datasheet]
[Manual]
[STP]

001-1BA10

CM 001 - Potential distributor module

8xDC 0 V clamps
[Datasheet]
[Manual]
[STP]

001-1BA20

CM 001 - Potential distributor module

4xDC 24 V, 4xDC 0 V clamps
[Datasheet]
[Manual]
[STP]