Skip to main content
  • SLIO

053-1PN01 - Interface modules | Fieldbus slave modules without I/Os

Order no.

053-1PN01

TypeIM 053PN
Module ID-

General information

Note-
FeaturesIntegrated 2-port switch
Up to 64 peripheral modules
Transfer rate 100Mbit/s full-duplex
Supports MRP slave as MRP client, FMM (Free Module Mapping), Easy Maintenance
Supports shared device with up to 3 connections
Supports IRT (Isochronous Real Time communication)
Supports multiple and single write (acyclic communication)
Integrated Web server
Integrated DC 24V power supply for power and electronic section supply of the periphery modules
Status LEDs

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)95 mA
Current consumption (rated value)0.95 A
Inrush current3.9 A
I²t0.14 A²s
Max. current drain at backplane bus3 A
Max. current drain load supply10 A
Power loss3 W

Status information, alarms, diagnostics

Status displayyes
Interruptsyes, parameterizable
Process alarmyes, parameterizable
Diagnostic interruptyes, parameterizable
Diagnostic functionsyes, parameterizable
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Service Indicatoryellow LED
Group error displayred SF LED
Channel error displaynone

Hardware configuration

Racks, max.1
Modules per rack, max.64
Number of digital modules, max.64
Number of analog modules, max.64

Communication

FieldbusPROFINET-IO
Type of interfaceEthernet 100 MBit
Connector2 x RJ45
Topology-
Electrically isolated
Number of participants, max.-
Node addresses-
Transmission speed, min.100 Mbit/s
Transmission speed, max.100 Mbit/s
Address range inputs, max.512 Byte
Address range outputs, max.512 Byte
Number of TxPDOs, max.-
Number of RxPDOs, max.-

Functionality MECHATROLINK-III slave

Supported profile-
Supported transfer cycle-
Cyclic data size per node-
Max. Number of nodes-
Supported communication method-
Supported command "Cyclic"-
Supported command "Event driven"-
Supported command "Message"-

Datasizes

Input bytes-
Output bytes-
Parameter bytes-
Diagnostic bytes-

Housing

MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)48.5 mm x 109 mm x 76.5 mm
Net weight167.5 g
Weight including accessories167.5 g
Gross weight185 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certificationyes

Downloads

[Datasheet]
[Manual]