Skip to main content
  • 300S+

323-1BL00 - Signal modules digital | Digital in/output modules

Order no.

323-1BL00

TypeSM 323

General information

Note-
Features16x DI
16x DO
DC 24 V
1 A
For 40 pole front connector
SPEED-Bus-

Current consumption/power loss

Current consumption from backplane bus65 mA
Power loss5.8 W

Technical data digital inputs

Number of inputs16
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 24 V
Current consumption from load voltage L+ (without load)176 mA
Rated valueDC 20.4...28.8 V
Input voltage for signal "0"DC 0...5 V
Input voltage for signal "1"DC 15...28.8 V
Input voltage hysteresis-
Signal logic inputSinking input
Frequency range-
Input resistance-
Input current for signal "1"7 mA
Connection of Two-Wire-BEROs possible
Max. permissible BERO quiescent current1.5 mA
Input delay of "0" to "1"3 ms
Input delay of "1" to "0"3 ms
Number of simultaneously utilizable inputs horizontal configuration16
Number of simultaneously utilizable inputs vertical configuration16
Input characteristic curveIEC 61131-2, type 1
Initial data size2 Byte

Technical data digital outputs

Number of outputs16
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 24 V
Reverse polarity protection of rated load voltage
Current consumption from load voltage L+ (without load)30 mA
Output current at signal "1", rated value1 A
Signal logic outputSinking output
Output delay of "0" to "1"150 µs
Output delay of "1" to "0"100 µs
Minimum load current-
Lamp load5 W
Parallel switching of outputs for redundant control of a loadpossible (only outputs   group)
Parallel switching of outputs for increased powernot possible
Actuation of digital input
Switching frequency with resistive loadmax. 1000 Hz
Switching frequency with inductive loadmax. 0.5 Hz
Switching frequency on lamp loadmax. 10 Hz
Internal limitation of inductive shut-off voltageL+ (-52 V)
Short-circuit protection of outputyes, electronic
Trigger level1.5 A
Number of operating cycle of relay outputs-
Switching capacity of contacts-
Output data size2 Byte

Status information, alarms, diagnostics

Status displaygreen LED per channel
Interruptsno
Process alarmno
Diagnostic interruptno
Diagnostic functionsno
Diagnostics information read-outnone
Supply voltage displaygreen LED per group
Group error displayred SF LED
Channel error displaynone

Isolation

Between channels
Between channels of groups to8
Between channels and backplane bus
Insulation tested withDC 500 V

Datasizes

Input bytes2
Output bytes2
Parameter bytes0
Diagnostic bytes0

Housing

MaterialPPE
MountingRail System 300

Mechanical data

Dimensions (WxHxD)40 mm x 125 mm x 120 mm
Net weight230 g
Weight including accessories240 g
Gross weight270 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certificationyes

Downloads

[Datasheet]
[Manual]