Skip to main content
  • 200V

253-1CA01 - Interface modules | Fieldbus slave modules without I/Os

Order no.


TypeIM 253CAN, CANopen slave

General information

FeaturesDC 24 V
1 Mbit/s
Up to 32 modules
10 Rx and 10 Tx PDO
2x SDOs
PDO linking, PDO mapping

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)50 mA
Current consumption (rated value)800 mA
Inrush current65 A
I²t0.85 A²s
Max. current drain at backplane bus3.5 A
Max. current drain load supply-
Power loss2 W

Status information, alarms, diagnostics

Status displayyes
Interruptsyes, parameterizable
Process alarmno
Diagnostic interruptyes, parameterizable
Diagnostic functionsyes, parameterizable
Diagnostics information read-outpossible
Supply voltage displayyes
Service Indicator-
Group error displayyes
Channel error displaynone

Hardware configuration

Racks, max.1
Modules per rack, max.32
Number of digital modules, max.32
Number of analog modules, max.16


Type of interfaceCAN
ConnectorSub-D, 9-pin, male
TopologyLinear bus with bus termination at both ends
Electrically isolated
Number of participants, max.127
Node addresses1 - 99
Transmission speed, min.10 kbit/s
Transmission speed, max.1 Mbit/s
Address range inputs, max.80 Byte
Address range outputs, max.80 Byte
Number of TxPDOs, max.10
Number of RxPDOs, max.10


MaterialPPE / PA 6.6
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)25.4 mm x 76 mm x 78 mm
Net weight100 g
Weight including accessories-
Gross weight-

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C


UL certificationyes
KC certification-